hotrod83
Newbie
Karma: +2/-0
Offline
Gender:
Posts: 37
Gabby's Motor Speedway. Victory Lane
|
|
« on: April 05, 2007, 07:17:25 pm » |
|
George, let me perpose this question to you, because nobody on hey mow can seem to answer it. What would be the proper distance between the starter and the ring gear? Some people say .004 and others say .010 and where would that measurement be taken from. The starter to the block? or the Bendix to the ring gear?
|
Michael Formentini #83F 2003, Tallagega Lawn Mower track champion. 2004, Coldwater Lawn Mower track champion. 2005, Coldwater Lawn Mower track champion. 2006, DSLMRA Twin Cyl. 2nd in points. 2007, Southern outlaws MOD-X and Supper Sportsman class champion.
|
|
|
|
johnboy
motivated
Karma: +0/-0
Offline
Gender:
Posts: 132
|
|
« Reply #1 on: April 06, 2007, 06:17:59 am » |
|
if it were me, I would go back to one of the old auto shop manuals where chevy first started using the shim type starters and look there. The best I remember it was .014 inch measured between the starter drive tooth point and the bottom of the matching flywheel teath V with the drive pushed up in the engage mode. johnboy
|
yea tho I walk through the valley of the shadow of death, I will fear no evil as you will be there to hold my hand and calm my body.
|
|
|
|
George Herrin
|
|
« Reply #2 on: April 06, 2007, 07:51:50 am » |
|
Agghhh but it isn't a Chevy. It's a mower. You cannot be told a specific measurement and it be right thats why ARC supplies so many shims with the flywheel when they sell it. Due to block imperfections (Casting) no two are identicle. I shim mine so the two are with in .010 of bottoming out in the gears pitch. Does that make sense. AND you can't really measure that with a feeler gauge you have to eye ball it. I pull the starter pinion up with a small screw driver with it bolted on to check this. If I don't like it I shim it differently then recheck it.
|
George Herrin #6 3 time USLMRA National Champion 8 time ARMA National Champion Herrin Mower Sports Racing Team/Fat Boyz Racing Hohenwald Tn. 38462 wk... 615-446-6807 http://btmra.smfforfree2.comhttp://www.eccarburetors.com/Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly proclaiming . . "WOW ---What a Ride
|
|
|
hotrod83
Newbie
Karma: +2/-0
Offline
Gender:
Posts: 37
Gabby's Motor Speedway. Victory Lane
|
|
« Reply #3 on: April 06, 2007, 04:39:26 pm » |
|
Thanks George, I just diden't know where they were taking the measurement from. I almost got it I need to shim it in a few more thousands and I'll be good to go.
|
Michael Formentini #83F 2003, Tallagega Lawn Mower track champion. 2004, Coldwater Lawn Mower track champion. 2005, Coldwater Lawn Mower track champion. 2006, DSLMRA Twin Cyl. 2nd in points. 2007, Southern outlaws MOD-X and Supper Sportsman class champion.
|
|
|
|
|