BAMA-TENN Mower Racing Assoc.
March 28, 2024, 12:40:53 pm
Welcome, Guest. Please login or register.

Login with username, password and session length
News: We are on Facebook check us out
 
  Home Help Search Arcade Gallery Links Staff List Login Register  

Arma and US legal Prepared chassis build

Pages: [1] 2 3 4   Go Down
  Print  
Author Topic: Arma and US legal Prepared chassis build  (Read 13760 times)
0 Members and 1 Guest are viewing this topic.
George Herrin
Administrator
BTMRA Veteran
*****

Karma: +3/-1
Offline Offline

Gender: Male
Posts: 1254



WWW
« on: December 23, 2006, 04:49:19 pm »




 Ok heres the rails and tranny plate from the bottom all done and welded in.



Ok here you can see inside the tunnel. You can see the bushing sticking up from the plate this supports the tranny input all the way up to the case bottom. Also if you can enlarge the pic you will see how the rear plate is welded in not just bolted but all done on the inside.



Ok here you can see the support I build that fits inside the dash. I use the same tubing as I did on the frame 3/4 thin wal. It has a place for the shaft to go thru and placement of the upper column and bearing support.



here you can see how it fits snugly inside the dash. This dash support has taken a 60 mph end over end kart wheel with out busting the plastic dash




Ok on to the steering column and its bearing setup. Here is another product E.C sells, its a universal weld in bearing mount and 5/8 spherical bearing. These work well on uneven and even surfaces where you mount on metal to weld them in I use one top and bottom.



Here is the lower steering column support and bearing welded in. Notice in the pictures how it fits right in the pocket where the oem parts were. you will also notice how I use 5/8 lock collars one one top of lower bearing and one on the bottom of upper bearing. I use a grinder and put a small notch so I can get to set screw.



Here is an overall view of the dash and support and cloumn all in.
Report Spam   Logged

George Herrin #6
3 time USLMRA National Champion
8 time ARMA National Champion
Herrin Mower Sports Racing Team/Fat Boyz Racing
Hohenwald Tn. 38462
wk... 615-446-6807
http://btmra.smfforfree2.com
http://www.eccarburetors.com/

Life should not be a journey to the grave with the intention of arriving safely in a pretty and well preserved body, but rather to skid in broadside, thoroughly used up, totally worn out, and loudly
proclaiming . . "WOW ---What a Ride


Pages: [1] 2 3 4   Go Up
  Print  
 
Jump to:  

Powered by EzPortal
Bookmark this site! | Upgrade This Forum
SMF For Free - Create your own Forum
Powered by SMF | SMF © 2016, Simple Machines
Privacy Policy
Page created in 0.045 seconds with 16 queries.